Boat GRIZZLY 580 HT
Length up to 6 meters is actually a border in a class of mobile boat. They do not have so rigid trailer selection requirements for transportation, it is possible to install on them less powerful and therefore more fuel-efficient engines, they are less hassle during launching. HT version refers to the category of multifunctional boats, comfortable for the rest. Different versions of the equipment allow to create a truly individual model, both for fishing in tough conditions and for a measured summer holiday with friends or family.
The main parameters
Technical specifications
| Length | 5.80 m |
| The maximum width of | 2.25 m |
| Freeboard | 0.90 m |
| Deadrise | 19º |
| Transom heightа | 510 mm |
| Weight | 620 kg |
| Hull | welded |
| Bottom thickness of | 4 mm |
| Board thickness (bead forming) | 3 mm |
| Recommended engine power | 90-150 hp |
| Hullmaterial | aluminum-magnesium alloy AlMG-5M |
| Number of passengers | 8 people |
- The choice of plastic colors
- Electric windlass.
- Targa (stainless steel).
- Audio-video equipment.
- Installing of remote-controlled searchlights.
- Tents.
- Additional transom for the motor.
- The ladder on the transom.
- Holders for spinning.
- Navigation equipment.
- Trolling equipment.
- Life jackets.
- Accessories on Maritim catalogue.
- Acquisition of new or little used motors.
- webasto for use in the northern latitudes,
- downriggers,
- glider coil,
- airframe,
- spinning-holders,
- built aerated ponds for fish storage.
- Plastic color: white.
- Steering with a steering cable for motor up to 200 hp.
- Steering wheel.
- The stationary fuel tank of 140 liters.
- Side rails.
- Stern rails.
- Top rails.
- Panoramic windows.
- Bow box under the anchor.
- Bow and stern lockers.
- Mooring cleats (4 pcs.).
- Anti-skid on the bow and stern.
Interior view
Exterior view
Additional description
The boats length up to 6 meters for a variety of reasons are the most popular in their class. But is it just enough to make the boat of «right size»? Does only the length of the boat guarantee success? Of course, not. Therefore we have created on the base of 580 length a boat that meets all the requirements of comfort and safety.
Seaworthiness is one of the key qualities of a good boat. Agile and easily controllable 580 HT shows its playful character in a variety of settings. It is planning easy even with loaded hull. It has excellent directional stability, both on flat water and in waves and wind; at low speed and in a mode of full throttle. To turn on full speed it requires very little space, and the banks are in the comfort values. There is no effect of porpoising, therefore you can fully enjoy the boat running.
In production we use only the best and proven materials. We use the most advanced technology of aluminum welding of seams. We provide the highest degree of reliability, at the same time, responding to aesthetic standards. Widely used the most modern equipment and the entire production is controlled and run by experienced technologists. Only high-quality materials from different countries are used in the decoration of the cabin and cockpit and manual labor ensures the reliability of the assembly.
It is normal to pay special attention to the safety on the water. The hull is completely unsinkable and complies with all accepted standards. Thus the great horizons are open for this boat and it can operate at high waters in conjunction with the seaworthiness.
The special attention was paid to ergonomics of the hull in the design. Up to 6 passengers can be placed comfortably on the boat, 4 full beds and a total interior space makes this model undisputed leader in its class. Rational use of space allows the amount of lockers of 1,200 liters, which is enough for the full journey.
Popular in Russia combination of materials is embodied in the hull. The aluminum hull is not only reliable and allows you to approach the shore in any conditions. One of the main tasks of our company is to break the stereotype of the classic boats welded “to boot”, that are with the angular shapes and sloppy welds.
Aesthetics is an important component of each boat model, especially of those whose vocation is not only fishing, but also to relax with friends, girlfriends or family outing. That is why the hull quality is of special attention. Top and deck are made in plastic and combined in such a way that looks like a single unit. Plastic enhances the stylish and elegant features. The decoration of the cockpit and the cabin is in modern high-quality materials.
We have included a package of necessary options as standard, but leaving the customer the choice of the individual characteristics of their boat in the additional options. We have installed highly reliable and high-quality equipment on the boat.
And also we recommend boat trailers for independent boat transportation.
Individual configuration
Contact Grizzly specialists to select a complete set according to your wishes and needs
